The price of electroplating discs and machine cutting

For the facade of the building, it is necessary to cut and sub-stones, for this reason, before using All types of electroplating discs and machine cutting became popular, stonemasons used tools to cut stones; On the one hand, it was costly and on the other hand, besides imposing a high cost, it reduces the resistance of the stone against breaking. But now plates with steel blades are used. This blade has high strength and is a suitable substrate for placing diamonds. In this regard, it should be said that the diamond of these disks is powder. The diamonds in these plates are long-lasting, sharp, and cut smoothly through stones. It means that the cut place is not a rat’s tooth. Therefore, these plates, which are called electroplate discs, perform both cutting and sanding. In stone quarries, electroplate discs are used to cut and cut all kinds of stones. Of course, it should be noted that due to the production technology of various types of electroplating discs and machine cutting, we may encounter falling of diamonds in some discs. Therefore, some types of these disks may have a short life.

Types of electroplating discs and machine cutting, types of electroplating discs and machine cutting, as mentioned, make a smooth cut. Therefore, they are used well for grinding and cutting stones, and also for shaping them in facades, etc. In this regard, these discs are divided into several categories for use in different tasks, so that electroplating is currently sold in 11.5, 180 and 230 mm sizes. Of course, the electroplate, whose diameter is 230 mm, is divided into two types, 6 screws and 8 Allen screws, based on the number of screws. In this regard, it should be mentioned that the 6-screw type has more vibration when working than the 8-screw type.